Dies
Thyristor die TR40-630-28
Dies
| Diameter [mm]: | 40 |
| IFAV/ITAV (Tс,°C) [A]: | 630 |
| VDRM/ VRRM [V]: | 2800 |
| Tjmax [°С]: | 125 |
- Documents and certificates
- Description
Thyristor die with a diameter of 40 mm, manufactured by JSC "Proton-Electrotex”. The semiconductor element features high resistance to electro-thermal cycling, as well as low static and dynamic losses. The device is optimized for multiple housing designs.
The manufacturing process includes silicon wafers polishing, diffusion process and lithographic processing, alloy and evaporation processes, bevel polishing and bevel jet etching.
The developed elements comply with generally accepted world quality standards. upon customer request, "Proton-Electrotex" is ready to select the optimal semiconductor element for the specified operating modes.
- Applications
As part of thyristors, they are used in general-purpose electrical and electronic devices for DC and AC circuits, electric welding, induction heating and melting systems, electric transport, motor drives, and uninterruptible power supplies (UPS).
-
Additional Information
- In order to remain the better performance, the chip shall be stored in nitrogen or vacuum condition to prevent the voltage change caused by oxidation and humidity of molybdenum pieces
- Always keep the chip surface clean, please wear gloves and do not touch the chip with bare hands
- Operate carefully in the process of use. Do not damage the resin edge surface of the chip and the aluminum layer in the pole area of the cathode
- In test or encapsulation, please note that the parallelism, flatness and clamp force the fixture must be coincide with the specified standards. Poor parallelism will result in uneven pressure and chip damage by force.
- If excess clamp force imposed, the chip will be damaged easily. If imposed clamp force is too small, the poor contact and heat dissipation will affect the application.
